Main Unit, Positive-pressure Type, 1 Mpa, PNP
Keyence AP-33ZP
Two-colour Digital Display Pressure Sensor AP-30 series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | AP-33ZP | |
| Type | Positive-pressure, PNP | |
| Rated pressure | 0 to 1.000 MPa | |
| Fluid type | Air or non-corrosive gases | |
| Type of pressure | Gauge pressure | |
| Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm) | |
| Display resolution | 0.01 bar, 0.2 Psi, 0.001 MPa, 0.01 kgf/cm2 | |
| Detectable pressure range | -15 to +110 % of F.S. | |
| Hysteresis | Variable (when hysteresis mode is selected), 0.5 % of F.S. in standard mode | |
| Response time (Chattering prevention function) | 2.5/5/100/500 ms (selectable) | |
| I/O | Zero-shift input | Input time: 20 ms or more |
| Control output | PNP open-collector 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable) | |
| Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | 50 mA (at 24 V) or less, 90 mA (at 12 V) or less | |
| Environmental resistance | Pressure resistance | 1.5 MPa (15 bar) |
| Ambient temperature | 0 to +50 °C (No freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable | |
| Weight | Approx. 120 g |
