Ultra Small CCD Barcode Reader, Side Type
Keyence BL-185SO(7031)
CCD Barcode Reader BL-180 series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | BL-185SO(7031) | |
| Reading direction | Side | |
| Light source/Light receiving element | LED/CCD image sensor | |
| Reading distance | 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width) | |
| Readable bar width | 0.125 to 1.0 mm *2 | |
| Largest readable label width | 80 mm *3 (Using narrow bars of at least 0.19 mm in width) | |
| PCS | 0.45 or more (Refl ectance of white part: 75% or more) | |
| Scanning rate | 500 scans/sec | |
| Supported codes | CODE39, ITF, Industrial 2-of-5, COOP 2-of-5, Codabar, CODE128, EAN/UPC (A·E) | |
| Number of readable digits | 32 digits | |
| Trigger input | Non-voltage input (contact or solid-state), TTL input is also possible. | |
| Serial interface | Applied standard | RS-232C |
| Synchronisation | Start-Stop | |
| Transmission code | ASCII | |
| Baud rate | 600/1200/2400/4800/9600/19200/31250/38400 bps | |
| Data length | 7/8 bits | |
| Parity check | None/Even/Odd | |
| Stop bit length | 1 bit/2 bits | |
| OK/NG output | Output form | NPN |
| Rated load | 24 VDC, 100 mA | |
| Leakage current (at OFF) | 0.1 mA max. | |
| Residual voltage (at ON) | 0.5 V max. | |
| Rating | Power voltage | 5 VDC ±5 %*4 |
| Current consumption | 300 mA | |
| Environmental resistance | Ambient light | Sunlight/Incandescent lamp: 10,000 lux, Fluorescent lamp: 3,000 lux. |
| Ambient temperature | 0 to +40 °C | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Operating environment | No dust or corrosive gas present | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Weight | Approx. 180 g | |
| *1 33 ±5 mm when the narrowest bar is less than 0.19 mm. *2 Readable bar width indicates the range of the narrowest readable bar. *3 60 mm when the narrowest bar is less than 0.19 mm. *4 Use a stable power supply of 5 VDC ±5 % . |
