Terminal Block Unit
Keyence FS-R3
Manual-Calibration Fibreoptic Sensor FS-V/T/M series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | FS-R3 | |
| Response time | 350 µs to 1 ms *1 | |
| Indicator lamp | Red LED | |
| Timer function | ||
| Number of inputs | 2 | |
| Input signal | NPN/PNP non-voltage input (contact,solid-state) switching | |
| Output mode | N.O./N.C. (selectable) | |
| Rating | Power voltage | 12 to 24 VDC ±5 %, Ripple (P-P) 5 % or less*2 |
| Current consumption | 50 mA or less, plus current consumed by connected sensor (100 mA or less) | |
| Environmental resistance | Ambient temperature | -10 to +50 °C (No freezing)*3 |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
| Case material | Polycarbonate | |
| Weight | Approx. 30 g | |
| *1 The response speed varies depending on the number of expansion units connected. *2 Change the supply voltage to meet the requirement of the input device (PLC, etc.). *3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 5 Units: -10 to +50 °C, 6 to 8 Units: -10 to +45 °C. |
