Fibre Amplifier, Cable Type, PNP
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
Model | FS2-60P | |
Type | Trimmer?Long detecting distance | |
Light source | Red LED | |
Sensitivity adjustment | 8-turn trimmer | |
Response time | 250 µs | |
Operation mode | LIGHT-ON/DARK-ON (switch-selectable) | |
Indicator lamp | Output: Red LED Stable operation: Green LED | |
Timer function | ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable) | |
External calibration input signal | ? | |
Buzzer mode | Buzzer ON when control output turns ON/Buzzer ON when alarm output turns ON/Buzzer OFF (switch-selectable) | |
Output | PNP output | |
Control output | PNP open-collector 100 mA max. (30 V max.), Residual voltage 1 V max. | |
Stability output | PNP open-collector 50 mA max. (30 V max.), Residual voltage 1 V max. | |
Protection circuit | Reversed polarity protection, Overcurrent protection, Surge absorber | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 35 mA or less | |
Environmental resistance | Ambient light | Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max. |
Ambient temperature | -10 to +55 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Material | Polycarbonate | |
Weight | Approx. 61 g |