Model	GT2-PA12K
Detection system	Scale Shot System II, absolute (no tracking errors) type
Measuring range	12 mm
Resolution	0.1 µm
Indicated accuracy	1 µm (p-p)*1
Measuring force	Downward mounting	1.2 N*2
Side mounting	1.15 N*2
Upward mounting	1.1 N*2
Sampling cycle	4 ms
Fluid used	Clean dry air
Operation indicator light	2-colour LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
Pressure resistance	0.5 MPa
Applied pressure range	0.24 MPa to 0.26 MPa
Ambient temperature	0 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	1,000 m/s2 (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle: SUS430 (Fluorine coating)
Contact	SUS304, cemented tungsten carbide*3
Sensor head cable	Optional (connect to relay connector)
Weight	Approx. 35 g (not including cable)*4
1 Value when the ambient temperature is 20 °C. 2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1. No dust boots are used with the GT2-PA12K/PA12. 3 Contacts are available as options sold separately. 4 Including the relay connector.

Keyence GT2-PA12K

High-Accuracy Digital Contact Sensor GT2 series

Stylus type Air cylinder type High-precision Sensor head

To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.

Model	GT2-PA12K
Detection system	Scale Shot System II, absolute (no tracking errors) type
Measuring range	12 mm
Resolution	0.1 µm
Indicated accuracy	1 µm (p-p)*1
Measuring force	Downward mounting	1.2 N*2
Side mounting	1.15 N*2
Upward mounting	1.1 N*2
Sampling cycle	4 ms
Fluid used	Clean dry air
Operation indicator light	2-colour LED (red, green)
Environmental resistance	Enclosure rating	IP67 (IEC)
Pressure resistance	0.5 MPa
Applied pressure range	0.24 MPa to 0.26 MPa
Ambient temperature	0 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	1,000 m/s2 (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle: SUS430 (Fluorine coating)
Contact	SUS304, cemented tungsten carbide*3
Sensor head cable	Optional (connect to relay connector)
Weight	Approx. 35 g (not including cable)*4
1 Value when the ambient temperature is 20 °C. 2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1. No dust boots are used with the GT2-PA12K/PA12. 3 Contacts are available as options sold separately. 4 Including the relay connector.