Amplifier unit, Panel mount type
Keyence IL-1550
CMOS Multi-Function Analogue Laser Sensor IL series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | IL-1550 | |
| Type | Panel mount | |
| Main unit/Expansion unit | Expansion unit | |
| Head compatibility | Compatible | |
| Display | Minimum displayable unit | IL-S025/IL-030: 1 µm, IL-S065/IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm |
| Display range | IL-S025/IL-030/IL-S065/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable) | |
| Display rate | Approx. 10 times/sec. | |
| Analogue voltage output | None | |
| Analogue current output | ||
| Control input | Bank switch input | Non-voltage input*1 |
| Zero-shift input | ||
| Stop emission input | ||
| Timing input | ||
| Reset input | ||
| Control output | Judgment output | Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*2 |
| Alarm output | Open collector output (NPN, PNP changeover possible/N.C.)*2 | |
| Current | Power voltage | Supplied by main unit*3 |
| Power consumption | 2200 mW or less (at 30 V: 74 mA or less) | |
| Environmental resistance | Pollution degree | 2 |
| Ambient temperature | -10 to +50 °C (No condensation or freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC | |
| Weight | Approx. 160 g (including attachments) | |
| *1 Assign an input of your choice to the 4 external input lines before using. *2 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) *3 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V. |
