Controller
Keyence LJ-V7001
High-speed 2D/3D Laser Profiler LJ-V7000 series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | LJ-V7001 | |
| Number of connectable sensors | Max. 2 units | |
| Display | Minimum displayable unit | 0.1 µm, 0.00001 mm2, 0.01° |
| Maximum display range | ±9999,99mm, ±9999,99mm2 | |
| Input terminal block | Laser remote interlock input | Non-voltage input*1 |
| Input terminal block | Encoder input | NPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported |
| Input terminal block | Trigger input | Non-voltage input*1 |
| Timing 1,2 input | ||
| Auto-zero 1,2 input | ||
| Input terminal block | Reset 1, 2 input | |
| Input terminal block | Start measurement/stop input | |
| Start storage/stop input | ||
| Clear memory input | ||
| Laser OFF input | ||
| Programme switch input | Non-voltage input x 4 inputs*1 | |
| Output terminal block | Analogue voltage output | ±10 V x 2 outputs, Output impedance: 100 ? |
| Output terminal block | OUT comparator output | NPN open collector output x 12 outputs*2 (Can freely assign 16 OUTs x 3 stage judgement results) |
| Strobe output | NPN open collector output*2 | |
| Disable trigger output | ||
| Memory FULL output | ||
| Ready output | ||
| Output terminal block | Error output | NPN open collector output (N.C.)*2 |
| PC interface | Ethernet | 1000BASE-T/100BASE-TX*3 |
| USB | USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)*3 | |
| RS232C | Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s) | |
| Rating | Power voltage | 24 VDC ±10 %, including Ripple (P-P) |
| Current consumption | 1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads | |
| Environmental resistance | Ambient temperature | 0 to +50 °C |
| Relative humidity | 20 to 85 % RH (No condensation) | |
| Weight | Approx. 1,500 g | |
| *1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current *2 The rating for NPN open-collector output is up to 50 mA (40 V or less), residual voltage of up to 1 V *3 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. |
