Cable type
Keyence LR-W500
Self-Contained Full-Spectrum Sensor LR-W series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | LR-W500 | |
| Type | 2 m cable type | |
| Detecting distance | 30 to 500 mm | |
| Min. spot diameter | Adjustable spot Approx. ø3.5 mm at 100 mm Approx. ø9 mm at 250 mm Approx. ø18 mm at 500 mm | |
| Response time | 200 µs/1 ms/10 ms/100 ms/500 ms selectable *1 | |
| Light source | White LED | |
| Mutual interference reduction function | Up to 2 units when alternate frequencies set | |
| Timer | OFF/ON delay/OFF delay/One-shot | |
| Power supply | Power voltage | 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS |
| Current consumption | 65 mA or less (without load) at 24 VDC; 120 mA or less (without load) at 12 VDC *2 | |
| I/O | Control output | NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, remaining voltage: 2 V or less N.O./N.C. selectable *3 |
| External input | Tuning /Transmission OFF selectable Short circuit current: 1 mA or less for NPN/2 mA or less for PNP For the applied voltage, see the wiring diagrams in the instruction manual. For the input times, see the time charts in the instruction manual. *3 | |
| Protection circuit | Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection | |
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) |
| Ambient light | Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less | |
| Ambient temperature | -20 to +50 °C (No freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 1,000 m/s2, 6 times in each of the X, Y, and Z directions | |
| Material | Case: Zinc die cast (Nickel chrome plating), Indicator cover: PPSU, Buttons: PES Lens cover and display: PMMA (scratch-resistant coating), Cable bushing: PBT, Cable: PVC, Spot adjustment dial: Iron (triiron tetraoxide coated) | |
| Weight | Approx. 170 g (including cable) | |
| *1 When alternate frequencies are set, the response time increases by approximately 20%. *2 195 mA or less (at 10 V, with load) *3 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. |
