Model	LS-9006D
Type	Head: 2-axis standard model
Measurement range	ø0.04 mm to ø6 mm
Smallest detectable object	0.04 mm
Repeatability	±0.03 µm*1
Measurement accuracy	±0.5 µm*2
Sampling cycle	16,000 samples/sec.*3
Light source	InGaN green LED
Monitor camera	Not provided
Environmental resistance	Enclosure rating	IP67 (including connector part)
Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
Ambient temperature	0 to +50 °C
Relative humidity	20 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	15 G/6 ms
Material	Aluminum
Weight	Approx. 4.8 kg
1 A ±2? margin of error when measuring a ø1.0 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. 2 Margin of error when a moving ø1.0 mm rod is measured in the 2 mm x 2 mm measurement area. *3 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function.

Keyence LS-9006D

Ultra-High-speed, High-accuracy Optical Micrometer LS-9000 series

Head: 2-axis small-diameter model without monitor camera

To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.

Model	LS-9006D
Type	Head: 2-axis standard model
Measurement range	ø0.04 mm to ø6 mm
Smallest detectable object	0.04 mm
Repeatability	±0.03 µm*1
Measurement accuracy	±0.5 µm*2
Sampling cycle	16,000 samples/sec.*3
Light source	InGaN green LED
Monitor camera	Not provided
Environmental resistance	Enclosure rating	IP67 (including connector part)
Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
Ambient temperature	0 to +50 °C
Relative humidity	20 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	15 G/6 ms
Material	Aluminum
Weight	Approx. 4.8 kg
1 A ±2? margin of error when measuring a ø1.0 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. 2 Margin of error when a moving ø1.0 mm rod is measured in the 2 mm x 2 mm measurement area. *3 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function.