3-Axis UV Laser Marker (Wide area)
Keyence MD-U1020C
3-Axis UV Laser Marker MD-U series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | MD-U1020C | |
| Type | Marking unit (controller + head) Wide area | |
| Console | MC-P1 (sold separately) | |
| 2D code reader add-in | MD-XAD1/MD-XAD1A (sold separately) | |
| Marking style | XYZ 3-Axis simultaneous scanning method | |
| Marking laser | Type | YVO4 laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) *1 |
| Wavelength | 355 nm | |
| Output | 3 W/40 kHz (output at focal point: 2.5 W) | |
| Q-switch frequency | CW (continuous wave), 40 to 400 kHz | |
| Guide laser / working distance pointer | Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) *1 | |
| Marking area | 330 x 330 x 42 mm | |
| Standard working distance (±variation width) | 300 mm (±21 mm) | |
| Marking resolution | 5 µm | |
| Scan speed | Max. 8,000 mm/s | |
| Character type | Font | KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*2 |
| Barcode | CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93 | |
| 2D code | QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix) | |
| GS1 DataBar | GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A | |
| Logo image | Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF | |
| Marking conditions | Marking style | Stationary marking, Moving marking (constant, encoder) |
| Character size (height × width) | 0.01 to 330 mm | |
| Number of registered programs | 2,000 max. | |
| Number of blocks | 256 | |
| Input / Output | Terminal block I/O, MIL connector I/O, contactor control I/O | |
| Interface | RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) *3 | |
| Marking unit installation direction | All directions | |
| Marking unit cable length | 4.3±0.1 m | |
| Cooling method | Forced air cooling | |
| Overvoltage category | II | |
| Pollution degree | 2 | |
| Enclosure rating | IP64 (marking head) | |
| Rated voltage and power consumption | Single-phase 100 to 240 VAC±10 %, 50/60 Hz, 800 VA max. | |
| Environmental resistance | Operating ambient temperature | 0 to + 40 °C |
| Operating ambient humidity | 30 % to 85 % (no condensation) | |
| Ambient temperature for storage | ? 10 to + 60 °C (no freezing) | |
| Ambient humidity for storage | 30 % to 85 % (no condensation) | |
| Weight | Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg | |
| Compatible regulations | EU directive (EMC directive, low-voltage directive, RoHS directive), EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581), CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1), North America regulations (FCC Part 15B, ICES-001 Class A) | |
| *1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialogue boxes of the fonts shown on the [Fonts] screen in [Control Panel] . *3 There are two USB ports : a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IPTM and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IPTM is either a registered trademark or a trademark of ODVA. |
