Model	PS-T2
Type	1-line connection
Output	NPN
Response time	500 µs
Operation mode	LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp	Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED
Timer function	ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)
External calibration input signal	Non-voltage input (contact, solid state)
Control output	NPN:100 mA max. (40 V max.) Residual voltage: 1 V max.
Stability output	NPN:50 mA max. (40 V max.) Residual voltage: 1 V max. *1
Protection circuit	Reverse polarity protection, Over-current protection, Surge absorber
Multiple connections to Expansion units	Up to 16 expansion units can be connected (a total of 17 units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption	35 mA or less
Environmental resistance	Ambient temperature	-10 to +55 °C (No freezing)*2
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Body/Cover: Polycarbonate
Weight	Approx. 40 g (including 2 m cable)
1 Power for the PS-T2 (P)/T0 is supplied through the PS-T1, FS-T1, FS-M1 or FS-R0. 2 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected. When 3 to 10 units: -10 to +50 °C (14 to 122 °F) When 11 to 16 units: -10 to +45 °C (14 to 113 °F) When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

Keyence PS-T2

Amplifier Separate Type Photoelectric Sensor PS-T series

Categories: Photoelectric Sensors, Sensors

Description
GET A PRICE
Specification

Description

Amplifier Unit, Expansion Unit, NPN

GET A PRICE

To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.

Specification

Model	PS-T2
Type	1-line connection
Output	NPN
Response time	500 µs
Operation mode	LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp	Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED
Timer function	ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)
External calibration input signal	Non-voltage input (contact, solid state)
Control output	NPN:100 mA max. (40 V max.) Residual voltage: 1 V max.
Stability output	NPN:50 mA max. (40 V max.) Residual voltage: 1 V max. *1
Protection circuit	Reverse polarity protection, Over-current protection, Surge absorber
Multiple connections to Expansion units	Up to 16 expansion units can be connected (a total of 17 units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption	35 mA or less
Environmental resistance	Ambient temperature	-10 to +55 °C (No freezing)*2
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Body/Cover: Polycarbonate
Weight	Approx. 40 g (including 2 m cable)
1 Power for the PS-T2 (P)/T0 is supplied through the PS-T1, FS-T1, FS-M1 or FS-R0. 2 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected. When 3 to 10 units: -10 to +50 °C (14 to 122 °F) When 11 to 16 units: -10 to +45 °C (14 to 113 °F) When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

Keyence PS-T2

Related products

Keyence F-3H

Keyence F-5HA

Keyence FS-N11N

Keyence F-20T