Square Transmissive Cable Type, PNP
Keyence PZ2-51P
Built-in amplifier photoelectric sensors PZ2 series
GET A PRICE
To receive a proposal, please send your request to info@sensors-trade.com and specify the required positions and company details.
Specification
| Model | PZ2-51P | |
| Type | Thrubeam | |
| Detection distance | 7 m | |
| Light source | Red LED | |
| Detectable object | 30 mm2 dia. min. opaque materials | |
| Hysteresis(of detecting distance) | - | |
| Sensitivity adjustment | 1-turn trimmer (240°) | |
| Response time | 1.5 ms max. | |
| Operation mode | LIGHT-ON/DARK-ON (switch-selectable) | |
| Indicator lamp | Output and power*1: Red LED, Stable operation: Green LED | |
| Controloutput | NPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max. | |
| Protection circuit | Reversed polarity, overcurrent protection, surge absorber | |
| Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | Transmitter: 20 mA or less, Receiver: 25 mA or less | |
| Environmental resistance | Enclosure rating | IP67 |
| Ambient light | Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max. | |
| Ambient temperature | -20 to +55 °C (No freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 1,000 m/s2, 6 times in each of the X, Y, and Z directions | |
| Case material | Glass-fibre reinforced plastic | |
| Accessories | Mounting bracket x 2, Mounting screws x 4, Plate nut x 2 | |
| Weight | Approx. 50 g (including 2-m connector cable) | |
| *1 The power indicator is equipped with the PZ2-51 only. |
