POWER SUPPLY

Rated voltage A1?A2 (Un): 24 Vdc

Max. DC residual ripple in DC: 10%

Supply voltage tolerance: ±15% of Un

Rated consumption (w/o load): < 3 W

Protection against short circuits: PTC resistance, Ih=1.5 A

PTC response time: Response time > 100 ms, release time > 3 s

Internal protection against short circuits on outputs (Tx, Ox): Electronic

Maximum current output of the module as the total current of the Ox and Tx outputs: 0.5 A

Self?test duration on startup: < 2 s

INPUT CIRCUIT(LX)

Voltage and current in the input circuits: 24 V, 5 mA

Input signals: 0?8 V (Off), 12?24 V (On)

Galvanic separation: No

Minimum duration of input signal: 10 ms

Input signal filtering: Yes, maximum interfe?rence period 0.4 ms

Maximum input resistance: 100 ?

Maximum input capacitance: 470 nF to ground, 470 nF between two conductors

IN COMPLIANCE WITH STANDARTS

EN 60947?1, EN 60947?5?1, EN 60204?1, EN ISO 13849?1, EN ISO 13855, EN ISO 14118, EN ISO 12100, EN ISO 13850, EN 60529, EN 61000?6?2, EN 61000?6?3, EN 61326?1, EN 61326?3?1, EN 60664?1, EN 62061, EN IEC 63000, UL 508, CSA C22.2 No. 14, GB/T14048.5

CIRCUITS WITH TEST SIGNALS(TX)

Signal type: Pulsed 100 Hz 24V/0V, duty cycle 50%

Max. total current: See Supply

Protected against short circuit: Yes

SEMICONDUCTOR SAFETY OUTPUT CIRCUITS (OSx) WITH 8 SAFETY OUTPUTS

Rated voltage 24V?0V: 24 Vdc

Number of outputs: 8

Output type: PNP

Maximum current per output: 0.4 A

Max. total output current: 3 A

Minimum current: 10 mA

Maximum capacitive load to ground per output: 400 nF

Maximum inductive load per output: 500 mH

Protection fuse: 4 A type gG

Galvanic separation: Yes

Impulse withstand voltage (Uimp): 0.8 kV

Rated insulation voltage (Ui): 32 V

Short circuit detection between outputs: Yes

Duration of the deactivation impulses at the safety outputs: < 300 µs

DIMENSIONS, mm